Fast deliveries / Customer support 24/7

HOBBYWING - XeRun V10 5T G3 Brushless Sensored Motor - 1/10 Off Road

  • 950 SEK
In stock
Article Number: 30401116
Supplier: HOBBYWING
  • It’s a motor specially designed for high-level racing. The RMP of G3 Stock motor is significantly improved, the KV & torque are improved by 16% and 4% respectively, compared with the V10 G2 Stock motor.
    • Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when comparing with the V10 G2 motors.
    • The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor. 
    • The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
    • The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts. 
    • The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
    • The use of high-performance stator core, heat ( 200°C) - resistant wire, heat (200°C) - resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
    • Asymmetric Bearings: By comparison (with the V10 G2 motor), for improving the load-carrying capacity, the size of the front bearing of the G3 motor is increased by 26% ; while for lower resistance, the size of the rear bearing is reduced by 6%. The asymmetric bearing design will make the motor running more stable and smooth.
    • It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC and etc.
  • 5T Specs: 
    • Application: 1/12 & 1/10 Modified On-Road Racing
    • Type: Sensored Brushless
    • Poles: 2
    • KV Rating: 6500
    • LiPo: 2S
    • No Load Current: 5.5A
    • Max Power Output: 443W
    • Amp at max power: 118A
    • OD: 35.9 mm
    • Length: 51.2 mm
    • Shaft dia: 3.17 mm
    • Shaft length: 13.3 mm
    • Weight: 159 g
    • Std rotor: 5-12.3
    • Timing: 20-50° (Adjustable)